Meade LX20 Manuel d'utilisateur télécharger pdf (Page 2)

B. Items inside the telescope case

Meade 8” LX200 Telescope with 8” dust cover and cap for rear cell

1. Power adapter and cord

2. Handheld electronic control keypad

3. 2 coiled cords (one for keypad w/ 4 pin phone jack connectors and one for the

declination motor w/ DB-9 connectors that are slightly wider)

C. Items inside the accessory case

1. Finderscope

2. Visual back (allows connection of an eyepiece or diagonal)

3. Diagonal prism

4. 7 Meade series 4000 Super Plössel eyepieces each in their own plastic case

 6.4 mm (313¥ magnification, 0.17° field of view when used on f/10 Meade 8”)

 9.7 mm (206¥ , 0.25°)

 12.4 mm (161¥ , 0.32°)

 15 mm (133¥ , 0.39°)

 20 mm (100¥ , 0.52°)

 26 mm (77¥ , 0.68°)

 32 mm (63¥ , 0.83°)

 40 mm (50¥ , 0.88°)

5. 2¥ Barlow lens

6. Eyepiece filters (Moon filter and set of color filters)

7. Light Pollution Reduction Filter

Generalized Setup Procedure

1. Attach telescope base to tripod. There’s only one screw, and it can be a bit tricky to

set it in correctly. When the telescope is screwed to the tripod correctly, there should

be no space between the base and tripod and the telescope base should not rotate.

2. Attach finderscope to main telescope (see below)

3. Level telescope (use bubble as guide, hopefully it shouldn’t be too far off).

4. Attach cables:

 Dec motor to main base

 Paddle to base

 Plug to converter

 Converter to base

5. Power up!

1 2 3 4 5 6

Pas de commentaire

Meade LX20 Manuel d'utilisateur Page 2